Alien Pom Pom Kit

Alien Pom Pom Kit

You will need:

  • Large stripped pom pom
  • 2 pieces of pipe cleaner
  • 2 sticky back feet or non sticky back
  • 2 wiggle eyes

Instructions

  1. Glue the large pom pom to the two feet as per the picture ensuring the sticky side of the feet face downwards.
  2. Glue the wiggle eyes onto the front of the pom pom.
  3. Twist and shape the 2 pieces of pipe cleaner to the desired  shape and glue to the top of the pom pom.
  4. Take the pieces of paper of the bottom of the feet and stick to the dashboard of the car.  If you are using feet which are not  sticky back ones then place your completed pom pom on a shelf to display.

If you don’t have stripped pom poms then any colour is fine and the bigger the better.

You can buy a complete kit of the bits you need from www.one-stop-party.co.uk

Elephant Pom Pom Kit

Elephant Pom Pom Kit

You will need:

  • 1 large grey pom pom
  • 1 medium grey pom pom
  • 4 small grey pom poms
  • 1 piece of grey foam
  • 2 pieces of grey pipe cleaner
  • 2 wiggle eyes

Instructions

  1. Using the template, cut out the ears from the piece of foam
  2. Glue the medium pom pom to the ears to form the head.
  3. Stick the wiggle eyes to the head.
  4. Twist the large piece of pipe cleaner around a pencil to form a coil for the nose and glue to the front of the head just below the eyes.
  5. Glue the head piece to the large pom pom.
  6. Glue the 4 small pom poms to the body to form the legs.
  7. Curl the small piece of pipe cleaner slightly to form the tail and glue to the back of the body.

You can buy a complete kit of the bits you need from www.one-stop-party.co.uk

Edna the Emu Pom Pom

Edna the Emu Pom Pom

You will need:

  • 1 large pom pom
  • 1 small pom pom
  • 1 pipe cleaner
  • 2 wiggle eyes
  • Orange foam for beak

Instructions

  1. Cut a piece of pipe cleaner 5cm long to use for the neck.  Cut the remainder of the pipe cleaner in half for the legs.
  2. Shape the pipe cleaner to form the feet and knees as per the picture.
  3. Glue the two legs to the large pom pom and allow to dry.
  4. Glue the neck to the small pom pom and allow to dry.
  5. Using the orange foam, cut a small piece for the beak and glue to the head.
  6. Glue the two eyes on to the head just above the beak.
  7. Glue the head and neck to the body and allow to dry.
  8. Glue the feather to the back of the bird and you’re now ready to display.

Any colour pom pom and pipe cleaner works well.

You can buy a complete craft kit of the bits you need from www.one-stop-party.co.uk

Katy Caterpillar

Katy Caterpillar

You will need:

  • 4 small pom poms
  • 1 larger pom pom
  • 2 tiny pom poms
  • 2 small pieces of pipe cleaner
  • 2 wiggle eyes

Instructions

  1. Glue the 4 small pom poms together in a row.
  2. Glue the larger pom pom to the end to form the head.
  3. Glue the 2 tiny pom poms to the end of the 2 pieces of cleaner.
  4. Now glue the pipe cleaner to the head to form the antenna.
  5. Last but not least, glue the 2 wiggle eyes on the front of the head.

Any colour pom pom and pipe cleaner works well. You could try using different colours to make a stripy one.

You can buy a complete kit of the bits you need from www.one-stop-party.co.uk

Spider Pom Pom

Spider Pom Pom

You will need:

  • 1 large black pom pom
  • 1 small black pom pom
  • 2 wiggle eyes
  • 2 black pipe cleaner

Instructions

  1. Cut the pipe cleaner in half.
  2. Glue two pieces of the pipe cleaner to each side of the pom pom to form the legs.  Bend to shape.
  3. Glue the small pom pom to the large pom pom to form the head.
  4. Glue the eyes to the head.

You can use any colour for this craft.  I’ve also made one with brown pom poms and stripy pipe cleaner for the legs.

You can buy a complete kit of the bits you need from www.one-stop-party.co.uk

Butterfly Bookmark

Butterfly Bookmark

You will need:

  • Coloured lolly stick
  • Piece of coloured foam
  • Small piece of pipe cleaner
  • Shiny gems to decorate
  • Piece of different coloured foam or large gem for body

Instructions

  1. Cut a butterfly shape from your piece of foam.
  2. Affix it to one end of your lolly stick.
  3. Cut your pipe cleaner into two small pieces and affix to the butterfly for the antenna.
  4. Affix your shiny gems to decorate the wings.
  5. Cut out the body from your extra piece of foam  and affix to the butterfly.  If you have a large gem affix this to the body instead.

You can buy a complete kit of the bits you need from www.one-stop-party.co.uk